11kV Pin Insulator

Product Detail

 

1.Polymer Insulator Character:

1.1high mechanical strength;

1.2Good performance of hydrophobicity and anti-pollution;

1.3 Excellent electrical Performance;

1.4 Small volume and light weight.

1.TID polymer Insulator Character:

2.1 We adopt the advanced injection producing technology for housing and the design of the shed adopt unique aerodynamics principle.

2.2 We use HTV silicone rubber which hydrophobicity can reach to HC1 level and thickness of the housing is more than 3mm .

2.3 We use ECR rod as the core which is high acid resistant.

2.4 We use hot dip Galvanizing steel fitting ,the thickness of the zinc more than 86µm.

2.5 We adopt the advance fitting crimping producing technology .

2.6 We adopt the unique notch design of the sealing of metal fitting, all the notch thickness keep the same which avoid the sharp end discharge.

2.7 We use HTV instead of the RTV seal the interface between the fitting and rod.

3. Drawing:

 4.Technical Character:

Type	Rated Voltage (KV)	SCL (KN)	Section Length H(mm)	Min Arcing Distance h(mm)	Min Nominal  Creepage Distance L(mm)	Lightning Impulse Withstand Voltage (KV)	Power Frequency with stand voltage (KV)	Drawing No.
FP-15T	10	3	206±10	125	300	90	40	1
FP-20T	10	3.5	250±10	165	450	90	40	1
FP-11/11	11	11	305±5	185	500	125	50	1
FP-22/10	22	10	470±10	270	960	150	85	2
FP-33/9	33	9	600±10	467	1500	258	130	2
FP-33/12.5	33	12.5	600±10	530	1440	325	140	2