Suspension Polymer Insulator

Product Detail

1.Polymer Insulator Character:

1.1high mechanical strength;

1.2Good performance of hydrophobicity and anti-pollution;

1.3 Excellent electrical Performance;

1.4 Small volume and light weight.

1.TID polymer Insulator Character:

2.1 We adopt the advanced injection producing technology for housing and the design of the shed adopt unique aerodynamics principle.

2.2 We use HTV silicone rubber which hydrophobicity can reach to HC1 level and thickness of the housing is more than 3mm .

2.3 We use ECR rod as the core which is high acid resistant.

2.4 We use hot dip Galvanizing steel fitting ,the thickness of the zinc more than 86µm.

2.5 We adopt the advance fitting crimping producing technology .

2.6 We adopt the unique notch design of the sealing of metal fitting, all the notch thickness keep the same which avoid the sharp end discharge.

2.7 We use HTV instead of the RTV seal the interface between the fitting and rod.

3.Main Parameter:

 

Type	Rated Voltage (KV)	SML (KN)	Section Length H(mm)	Min Arcing Distance h(mm)	Min Nominal  Creepage Distance L(mm)	Lightning Impulse Withstand Voltage (KV)	Power Frequency with stand voltage (KV)
FXBW-10/70	10	70	365±15	180	500	165	50
FXBW-15/70	15	70	390±15	190	450	160	50
FXBW-24/70	24	70	485±10	280	660	180	72
FXBW-33/70	33	70	530±15	330	820	210	85
FXBW-35/70	35	70	630±15	450	1230	230	95
FXBW-35/70	35	70	680±10	495	1440	230	95
FXBW-35/100	35	100	765±15	540	1550	230	95
FXBW-36/100	36	100	580±15	380	900	230	95
FXBW-66/100	66	100	1180±15	980	3100	530	196