Tension Composite Insulator

Product Detail

1.Polymer Insulator Character:

1.1high mechanical strength;

1.2Good performance of hydrophobicity and anti-pollution;

1.3 Excellent electrical Performance;

1.4 Small volume and light weight.

1.TID polymer Insulator Character:

2.1 We adopt the advanced injection producing technology for housing and the design of the shed adopt unique aerodynamics principle.

2.2 We use HTV silicone rubber which hydrophobicity can reach to HC1 level and thickness of the housing is more than 3mm .

2.3 We use ECR rod as the core which is high acid resistant.

2.4 We use hot dip Galvanizing steel fitting ,the thickness of the zinc more than 86µm.

2.5 We adopt the advance fitting crimping producing technology .

2.6 We adopt the unique notch design of the sealing of metal fitting, all the notch thickness keep the same which avoid the sharp end discharge.

2.7 We use HTV instead of the RTV seal the interface between the fitting and rod.

3. Drawing:

 




4. Main Parameter:

Type	Rated Voltage (KV)	SML (KN)	Section Length H(mm)	Min Arcing Distance h(mm)	Min Nominal  Creepage Distance L(mm)	Lightning Impulse Withstand Voltage (KV)	Power Frequency with stand voltage (KV)
FXBW-220/100	220	100	2150±30	1900	6300	1000	395
FXBW-220/100	220	100	2190±30	1900	6300	1000	395
FXBW-220/100	220	100	2280±30	1900	6300	1000	395
FXBW-220/160	220	160	2280±30	1900	6300	1000	395
FXBW-330/100	330	100	2930±40	2600	9075	1425	570
FXBW-330/100	330	100	2990±40	2600	9075	1425	570
FXBW-330/160	330	160	2930±40	2600	9075	1425	570
FXBW-500/210	330	210	2990±40	2600	9075	1425	570
FXBW-500/100	500	100	4360±40	4000	13750	2250	740
FXBW-500/100	500	100	4360±50	4000	13750	2250	740
FXBW-500/160	500	160	4450±50	4000	13750	2250	740
FXBW-500/180	500	180	4450±50	4000	13750	2250	740
FXBW-500/210	500	210	4450±50	4000	13750	2250	740
FXBW-500/240	500	240	4450±50	4000	13750	2250	740
FXBW-500/300	500	300	4450±50	4000	13750	2250	740
FXBW-500/400	500	400	4450±50	4000	13750	2250	740