Tension Polymer Insulator

Product Detail

1.Polymer Insulator Character:

1.1high mechanical strength;

1.2Good performance of hydrophobicity and anti-pollution;

1.3 Excellent electrical Performance;

1.4 Small volume and light weight.

1.TID polymer Insulator Character:

2.1 We adopt the advanced injection producing technology for housing and the design of the shed adopt unique aerodynamics principle.

2.2 We use HTV silicone rubber which hydrophobicity can reach to HC1 level and thickness of the housing is more than 3mm .

2.3 We use ECR rod as the core which is high acid resistant.

2.4 We use hot dip Galvanizing steel fitting ,the thickness of the zinc more than 86µm.

2.5 We adopt the advance fitting crimping producing technology .

2.6 We adopt the unique notch design of the sealing of metal fitting, all the notch thickness keep the same which avoid the sharp end discharge.

2.7 We use HTV instead of the RTV seal the interface between the fitting and rod.

3. Drawing:



 4. Main Parameter:

Type	Rated Voltage (KV)	SML (KN)	Section Length H(mm)	Min Arcing Distance h(mm)	Min Nominal  Creepage Distance L(mm)	Lightning Impulse Withstand Voltage (KV)	Power Frequency with stand voltage (KV)
FXBW-110/100	110	100	1240±15	1000	3150	550	230
FXBW-110/100	110	100	1320±15	1050	3150	550	230
FXBW-110/100	110	100	1390±10	1150	3150	550	230
FXBW-110/100-D	110	100	1400±15	1150	3650	550	230
FXBW-110/100	110	100	1440±15	1210	3150	550	230
FXBW-132/120	132	120	1650±10	1415	5800	575	370
FXBW-132/160	132	160	1650±15	1350	5800	575	370